dicky1
1 Answer
nlnnet
Instructions
things you'll need:
1 adjustable wrench
1
Turn off the main water supply to your house.
2
Locate the faucet or spigot that is situated at the lowest point for your house. Typically this will be an outside spigot.
3
Fasten a hose to this spigot and position the exit end of hose away from the house. Open this spigot.
4
Inside the house, open several (most) faucets.
5
Keep all faucets open until water no longer drains from the hose connected to the lowest located faucet/spigot.
6
Close the outside (lowest point) spigot once water no longer drains from it. Then turn on main water supply to the house.
7
Leave inside faucets open and allow these to run until the gurgling/spitting sound is no loner heard. Once the gurgling/spitting stops in all faucets the lines are free of air and all faucets may be closed.
things you'll need:
1 adjustable wrench
1
Turn off the main water supply to your house.
2
Locate the faucet or spigot that is situated at the lowest point for your house. Typically this will be an outside spigot.
3
Fasten a hose to this spigot and position the exit end of hose away from the house. Open this spigot.
4
Inside the house, open several (most) faucets.
5
Keep all faucets open until water no longer drains from the hose connected to the lowest located faucet/spigot.
6
Close the outside (lowest point) spigot once water no longer drains from it. Then turn on main water supply to the house.
7
Leave inside faucets open and allow these to run until the gurgling/spitting sound is no loner heard. Once the gurgling/spitting stops in all faucets the lines are free of air and all faucets may be closed.
| 9 years ago. Rating: 0 | |
