1 Answer

Low or No Water Pressure, Leaky Hose or Wand
Check to see if the water source is fully turned on, and if pressure is adequate. If leaks are spotted, tighten connections. If they persist, new O-rings or washers may be needed. Make sure all quick connects are tight and locked and that there are no crimps or bends in the hoses. Check to ensure the proper wand nozzle tip is locked in place and is clean and not worn or damaged. Follow the manufacturer's instructions when changing tips on the wand. Clean filter screens on the water intakes if they are clogged. If the water supply fails, turn off the engine until the problem is fixed.

Read more: Troubleshooting a Honda Pressure Washer | eHow http://www.ehow.com/way_5418014_troubleshooting-honda-pressure-washer.html#ixzz2U2wGiGMC