1 Answer

This is an alternative method to programming your device without using the code list. The
remote control will scroll through the list of codes to identify the correct code for your
device.
1. Turn on the device that you want to set.
2. Aim the remote control at the device and press and hold down the CODE SEARCH button
for at least 3 seconds until the red LED lights up solid red.
3. Press the device button for the item you wish to program, e.g. TV, DVD, VCR, etc. and the
LED light will blink once and then remain solid red.
4. Press ON/OFF button on remote slowly and repeatedly until the device you are trying to
program shuts off. (Note LED will blink once each time you press ON/OFF button)
5. Once this occurs, press ENTER button to store the code and the LED light will turn off. 

http://www.jumboremotecontrol.com/innovage_jumbo_remote_manual.PDF

Colleen

It could be under another name. I found very little information about this device. Apparently it is not a common one. If I could see a picture of it, I might be able to help more. Every time I search TDEsystems, Innovation comes up. This time I clicked on images to see if I could find a picture of it. Does this look like your remote? (click the link) http://www.jumboremotecontrol.com/