close
    replace hub 1983 plymouth scamp

    need details!!!

    0  Views: 382 Answers: 1 Posted: 12 years ago

    1 Answer

    Hub installation is a degree more difficult than changing a tire on most vehicles.
    1. Jack the vehicle up and support with proper jack stands.
    2. Have a helper hold the brake pedal while you loosen the Axle Shaft Nut. This usually requires a large socket (30mm or larger) and impact wrench.
    3. Remove the brake caliper and brake rotor. Use string or a plastic tie to hang the caliper up and out of the way.
    4. Unplug ABS sensor (if applicable)
    5. Unbolt the hub flange. The hub may come free from the axle shaft easily, if not, use a gear puller or similar tool that pulls on the hub while pushing on the axle shaft. DO NOT try to drive the axle out with a hammer, this could ruin your axle CV joints.



    Top contributors in Uncategorized category

     
    ROMOS
    Answers: 18061 / Questions: 154
    Karma: 1102K
     
    Colleen
    Answers: 47269 / Questions: 115
    Karma: 953K
     
    country bumpkin
    Answers: 11322 / Questions: 160
    Karma: 838K
     
    Benthere
    Answers: 2392 / Questions: 30
    Karma: 760K
    > Top contributors chart

    Unanswered Questions

    ggwinvideo
    Answers: 0 Views: 5 Rating: 0
    Nhà Đài RR88
    Answers: 0 Views: 8 Rating: 0
    mkroofingaus
    Answers: 0 Views: 13 Rating: 0
    Nhà Đài Lu88
    Answers: 0 Views: 11 Rating: 0
    Nhà Đài RR88
    Answers: 0 Views: 12 Rating: 0
    bancadoithuongbar
    Answers: 0 Views: 14 Rating: 0
    springboard35
    Answers: 0 Views: 13 Rating: 0
    > More questions...
    497432
    questions
    733588
    answers
    833787
    users