1 Answer

To set the Alarm clock press the "mode" button so that the "AL" shows in the upper right. Then once in this mode you can turn the alarm on and off with the "adjust" button. Or you can change time zones by pressing (and not holding) the "set" button. To change the time that the alarm will sound you need to press the "set" button for 1 second. Then the hours should blink and you can press the "adjust" button until you have the correct time. Then press the "set" button again to change to minutes and repeat. When you are complete, just press the "mode" button to return to the time. Oh and make sure the little bell icon is displayed to tell you that the alarm is set and will sound when the clock reached the time set in alarm mode.

Source :http://aolanswers.com/questions/set_ken-tech_alarm_clock_518213963788496