busterd
1 Answer
Colleen
For cars with voltage regulator mounted on the generator:
Remove the small blue wire from the regulator; this wire will connect to the "D+" terminal on the alternator
Remove the two large red wires from the voltage regulator. If you are installing a stock 50 amp alternator, install loop connectors on both wires and connect both to the "B+" post on the alternator. If you are installing a "Super 75" alternator, install a loop connector to the red wire coming from the left side of car (going to the dash) and connect to the "B+" post on alternator. Replace red wire going to the starter solenoid with new "Monster cable".
| 13 years ago. Rating: 0 | |
Top contributors in Maintenance & Repairs category
Unanswered Questions
RR99
Answers: 0
Views: 5
Rating: 0
xin88
Answers: 0
Views: 7
Rating: 0
qs88red
Answers: 0
Views: 9
Rating: 0
W88kiajpnet
Answers: 0
Views: 7
Rating: 0
vk8
Answers: 0
Views: 14
Rating: 0
Kho Tài Nguyên MMO
Answers: 0
Views: 8
Rating: 0
Sunwin - Cổng Game Bài Đổi Thưởng Macao Uy Tín 2026
Answers: 0
Views: 12
Rating: 0
77bd
> More questions...
Answers: 0
Views: 17
Rating: 0