joy.o.west
Where would I find a diagram to reassemble this?
2 Answers
Volcane
Best answer!
Have you looked at their manuals page?
http://manuals.deere.com/omview/OMFH309531_19/OMFH309531_19.htm
| 12 years ago. Rating: 0 | |
Unplugging Pickup
1. Back clear of windrow.
NOTE: MegaTooth and MegaWide Plus pickups require low engine rpm. Also, bump the PTO on and off to work the plug through.
2. Regular pickup only: Operate tractor at 1500-2100 rpm and engage PTO.
IMPORTANT: Do not prolong operating a raised pickup to clear the baler or the pickup drive may be damaged.
3. Raise and lower pickup a couple of times by moving tractor selector valve.
4. If baler does not clear, shut off PTO and tractor. (See UNPLUGGING BALER UNDER POWER in this section.)
5. If baler clears, return pickup to operating height and continue baling.
| 12 years ago. Rating: 1 | |
Unplugging is not the problem. I have taken the pickup apart and I need something to look at to help me put it back together.
Top contributors in Local Businesses category
Unanswered Questions
qh88betapp1
Answers: 0
Views: 7
Rating: 0
8kbet
Answers: 0
Views: 9
Rating: 0
mbshopvn
Answers: 0
Views: 9
Rating: 0
365ggus
Answers: 0
Views: 7
Rating: 0
Post Tensioning wedges and barrels,
Answers: 0
Views: 7
Rating: 0
Post Tensioning wedges and barrels, pre
Answers: 0
Views: 7
Rating: 0
Hi88 - Nhà Cái Cá Cược Giải Trí Việt Nam - Uy tín Đa Dạng Game Đẳng Cấp
Answers: 0
Views: 9
Rating: 0
What are the latest restaurant wallpaper trends?
> More questions...
Answers: 0
Views: 14
Rating: 0