rob69
1 Answer
constanta81
you remove the 4 nuts off the axel housing and with a puller you remove the axel from the housing.then you have to cut off the retainer before you can remove the bearing and finally the seal. if the seal leaks it could be that the bearing is wearing out causing the seal to leak. so i would do this job once by replacing the seal, bearing and retainer . remember that the retainer is pressed back on and you may need to find someone with a press machine to do it.
| 12 years ago. Rating: 1 | |
Top contributors in Maintenance & Repairs category
Unanswered Questions
playgo88at
Answers: 0
Views: 11
Rating: 0
cwin8orrg
Answers: 0
Views: 11
Rating: 0
ceonghi77win
Answers: 0
Views: 13
Rating: 0
8kbetcoupons
Answers: 0
Views: 13
Rating: 0
69vn123com
Answers: 0
Views: 14
Rating: 0
7M
Answers: 0
Views: 17
Rating: 0
KHUNGBOMCW77.IN | CHIẾN TRANH THẾ GIỚI
Answers: 0
Views: 12
Rating: 0
KHUNGBOMCW77.IN | CHIẾN TRANH THẾ GIỚI
> More questions...
Answers: 0
Views: 16
Rating: 0