close
    what are the 1990 buick century custom max air flow wire colors

    I want to install an maf resister mod and need to know which wire to splice 

    0  Views: 546 Answers: 1 Posted: 13 years ago

    1 Answer

    i think you mean mass air flow sensor which has 3 wires going to it. if your car's engine is stalling,it could be one of the easons it  is doooing so due to one or more of the 3 wires breaking inside the connector but you will not know it unless you tug or pull on them one at a time. it should snap off. if it does ,then you can get the special terminals from GM and secure them properly. if you need to test the mass air flow sensor without any scan tool then disconnect it before you start the engine and if it stays ideling it would indicate that the maf if probably bad.good luck



    Top contributors in Cars & Transportation category

     
    Colleen
    Answers: 831 / Questions: 0
    Karma: 12830
     
    ROMOS
    Answers: 248 / Questions: 0
    Karma: 10620
     
    Deleted User
    Answers: 172 / Questions: 0
    Karma: 4500
     
    pythonlover
    Answers: 94 / Questions: 0
    Karma: 2370
    > Top contributors chart

    Unanswered Questions

    SC88 - Trang Chủ Chính Thức Sc88.com 2026
    Answers: 0 Views: 2 Rating: 0
    Nhà Đài NBET
    Answers: 0 Views: 5 Rating: 0
    7Spin
    Answers: 0 Views: 5 Rating: 0
    keobongdatvcc1
    Answers: 0 Views: 4 Rating: 0
    keonhacai5csacom
    Answers: 0 Views: 5 Rating: 0
    drlivenet
    Answers: 0 Views: 13 Rating: 0
    Nhà Đài Lucky88
    Answers: 0 Views: 12 Rating: 0
    Non Denominational Church Jacksonville FL
    Answers: 0 Views: 13 Rating: 0
    > More questions...
    534284
    questions
    766526
    answers
    884498
    users