Victrola
1 Answer
Colleen
To bleed the brake system open all the bleeders and let the system gravity bleed for @ 1/2 hour ensuring the master stays full. Then close all bleeders and starting furthest from the master (r/r) have someone pump the brakes 2-3 times,hold the pedal down, then open the bleeder,close the bleeder,and repeat until there are no air bubbles and the brake fluid is running clear .Repeat for all wheels in this order R/R L/R R/F L/F ensuring master cylinder does not run empty. You cannot pump the pedal with a bleeder open you will be sucking air back into the system. Once you finish all wheels repeat to ensure there is no air remaining in system.
http://www.fixya.com/cars/t12315391-brake_bleeding_procedure_1989_ford
| 11 years ago. Rating: 2 | |
Top contributors in Uncategorized category
Unanswered Questions
квартира лида
Answers: 0
Views: 8
Rating: 0
Fumot Digital Box 12000
Answers: 0
Views: 14
Rating: 0
Nhận Định Kèo
Answers: 0
Views: 9
Rating: 0
789F
Answers: 0
Views: 10
Rating: 0
KQXS
Answers: 0
Views: 13
Rating: 0
tt99comorg
Answers: 0
Views: 9
Rating: 0
B52
Answers: 0
Views: 19
Rating: 0
квартиры на сутки лида
> More questions...
Answers: 0
Views: 12
Rating: 0