lyneiah
1 Answer
Colleen
Did you remove the safety tape from the cartridge head? Did you run the test page after you put the new cartridge in? Are you sure you have the cartridge seated correctly in the carriage?
| 12 years ago. Rating: 4 | |
This would be my reply as well. Also make sure it is seated properly. The long shot is that if its an ink jet type printer and the black was allowed to dry, it could be plugging the nozzles assuming the nozzles in the print head are not part of the cartridge. My canon has a printhead that if i let it sit too long, I must remove it and give it an alcohol bath.
Top contributors in Printers category
Unanswered Questions
keonhacai5spot5
Answers: 0
Views: 6
Rating: 0
amunracasino1
Answers: 0
Views: 19
Rating: 0
Nohu90 Quay Hu: Thien Duong Giai Tri Doi Thuong Dinh Cao Danh Cho Anh Em Cuoc Thu
Answers: 0
Views: 16
Rating: 0
Dairy Fridge and Chiller Repair
Answers: 0
Views: 19
Rating: 0
pengeluaran pcso
Answers: 0
Views: 21
Rating: 0
55qq
Answers: 0
Views: 9
Rating: 0
open88tdcom
Answers: 0
Views: 15
Rating: 0
8S ⭐️ Trang Chủ 8S.COM Đẳng Cấp #1 ✔️ Tặng 8.888K
> More questions...
Answers: 0
Views: 16
Rating: 0