1 Answer

There are 5 codes available for a Craig TV. They are listed below, along with the steps to address and/or power scan your remote if those codes don't work! Codes: 541, 657, 662, 694 ,536 

Manual search

Remote to TV:

1.) Press and hold the clear TV button until all mode lights light up.

2.) Release and TV light will be blinking.

3.) Enter code and press #. The TV button should flash 3 times.

4.) Try functions (Volume, Power, etc..) and see if it is working.

5.) If no function, repeat steps 1-4 with another code.

Power Scan to TV:

1.) With the TV on, press and hold the TV button (about six seconds) on top of the remote until all mode button backlights come on, then release.

2.) Press and release the red power button, then press the Up arrow button once a second while pointing the remote at the TV. If the code for the TV comes up, it will power off.

3.) Press the POUND (#) button. If the code entered is valid for the remote, the mode light flashes three times. To verify the code works try several different functions for that equipment.

Source: http://wiki.answers.com/Q/How_can_you_get_your_dish_remote_to_work_with_a_Craig_TV?#slide=7