close
    Replace front headlight bulb in 2006 Town Car Signature Limited

    What steps are necessary to replace high or low beam bulbs, passenger/driver side of car.  

    0  Views: 1567 Answers: 1 Posted: 7 years ago

    1 Answer

    Open the hood and make sure the car and the lights are off.
    Remove the plastic protective cover.There are 3 knobs,turn halfway and pull.Put aside and out of the way.
    Remove the three pins that are holding the light assembly in place.These are flat rods with a little bend at the end.
    Twist and un-plug the lights,now you can remove the whole lens.
    The light bulbs can also be removed and replaced from this point.
    Make sure all the bulbs are working before you put it back together.
    Source: REPLACE HEADLIGHT ASSEMBLY IN 2000 LINCOLN TOWNCAR


    Top contributors in Technical support category

     
    ROMOS
    Answers: 352 / Questions: 0
    Karma: 17120
     
    Colleen
    Answers: 895 / Questions: 0
    Karma: 16710
     
    Deleted User
    Answers: 156 / Questions: 0
    Karma: 4560
     
    Dardaigh
    Answers: 180 / Questions: 0
    Karma: 2820
    > Top contributors chart
    445462
    questions
    716096
    answers
    633031
    users