pscolman
1 Answer
Colleen
The F5 error code is a communication error in the ERC(Electronic Range Control) or the clock control/display. It can be a loose relay or diode on the control panel, a broken solder joint, or a part that is over heating and opening up. When it cools back down, then it might work again.
Either way, the end result is going to be to install a new ERC. If you know someone who can decipher the control board, it might be an easy fix for that person. Most technicians would just recommend replacing the ERC.
Depending on the full model number, the ERC has about 3-4 different part numbers. A full model number will be needed to get the correct ERC for your appliance.
| 12 years ago. Rating: 1 | |
Top contributors in Appliances category
Unanswered Questions
출장마사지 출장안마
Answers: 0
Views: 7
Rating: 0
jalalivebolatop
Answers: 0
Views: 8
Rating: 0
bl555 Uy Tín, Đẳng Cấp Quốc Tế
Answers: 0
Views: 6
Rating: 0
vozollatvia
Answers: 0
Views: 7
Rating: 0
exceedlondon
Answers: 0
Views: 12
Rating: 0
ispartawebajanscom
Answers: 0
Views: 7
Rating: 0
Soi kèo
Answers: 0
Views: 7
Rating: 0
kjc88comde
> More questions...
Answers: 0
Views: 10
Rating: 0