1 Answer
Instructions
1
Place the wheel chocks behind the rear wheels. Jack the car up with the automobile jack. Place a jack stand under the car near the jacking point and raise it to the frame.
2
Remove the wheel using the lug wrench to remove the lug nuts. Remove the brake caliper using a socket and ratchet to loosen the retaining bolts. Secure the caliper to the strut using a wire tie. Do not allow the caliper to hang or you will damage the brake lines.
3
Pull the brake rotors off the wheel. Put the new rotor on and place the caliper in the bracket on the wheel assembly. Tighten the retaining bolts with the socket and ratchet.
4
Place the wheel back on the car and tighten the lug nuts with the lug wrench. Remove the jack stand from under the automobile. Lower the vehicle to the ground and repeat the process on the other wheel.
Read more: How to Replace Brake Rotors on a 1998 Mercury Sable | eHow.com http://www.ehow.com/how_7395344_replace-rotors-1998-mercury-sable.html#ixzz2BnDC5mFf
12 years ago. Rating: 1 | |