skip01
Can anyone supply me with a wiring diagram. the only detail on the box is that it was made by POWERFLO drum capacity being 0.18m2
batch output is 0.10m2
drum diameter is 610mm storage dimensions are 25x25x25.5 inches
weight 54kgs
hertz 50htz votage
240v motor rpm 1680
Inside the mains box winding colors red,yellow and green make up one plug. two blacks make up a second plug.
Also 5 mfr capacitor. connected in some way to a two way mains switch and a relay.
can anyone help THANKS
RE-
THIS MACHINE WAS MADE BY POWERFLO
first of all there is no! connection block only two plug connectors.
One two pin plug:- with black leads.
Black-BL .5 OHMS (separate winding)
A three pin plug with:- Red,Yellow & Green leads (motor winding`s) resistances of which are:-
R-Y 43.7 OHMS R-G 14.9 OHMS G-Y 29.4 OHMS
These in turn connect to a six pin on/off switch and a relay.
Together with the above is a 5mfr capacitor (non! electrolytic)
4 Answers
Dardaigh
Is this of any help?
Fitting a plug - WARNING THIS PRODUCT MUST BE EARTHED
IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:
GREEN / YELLOW = EARTH, BLUE = NEUTRAL, BROWN = LIVE
The wire which is coloured Green and Yellow must be connected to the terminal in the plug marked E or coloured Green and Yellow.
The wire which is coloured Brown must be connected to the terminal in the plug marked L or coloured Red. The wire which is
coloured Blue must be connected to the terminal in the plug marked N or coloured Black.
Always ensure before connecting to the supply that the supply voltage is the same as the rated voltage marked on the motor.
http://www.jwhire.ie/docs/manual/E11005.pdf
| 11 years ago. Rating: 2 | |
Volcane
See if this link might help:
http://www.hayward-pool.com/pdf/manuals/Manual130.pdf
| 11 years ago. Rating: 0 | |
DONALD J
mMY FIRST QUESTION TO YOU IS THIS, WHERE ARE YOU LOCATED? BECAUSE IN THE USA WE RUN 60hz. NOT 50 ALSO, IF YOU KNOW THE ELETRICAL MANF,FOR THAT BOX , THAT YOUR SPEEKING OF,ALONG WITH THE MOTORS INFO, GO TO THEM ON LINE ,ASK THE STARTER BOX MANF, FOR A SCAMAITC... THAT WILL VERIFIE,THE WIRES COLORS,AS WELL TO WHAT PURPOISE THAY SERVE THE TOO MOST... IMPORANT!! ITEMS ARE..KNOW THIS... THAT CAPACITER... CAN KILL YOU... IT'S REASON FOR BEING THERE IS TOO JUMP START THAT MOTOR , AND CON BLOW YOUR HAND OFF ,... NO JOKE, I FEEL THAT IF YOU HAD TO ASK FOR INFO ON THIS MATTER,.. YOU NEED A REAL ELETRIONICS EXPERT.. PLEASE DON'T RISK YOUR SAFTY TO A MACHINE, GET A PRO... DONALD J TACOMA WA..
| 11 years ago. Rating: 0 | |
skip01
THIS MACHINE WAS MADE BY POWERFLO
Thanks for your suggestions but my machine is different from that you have sent me,
first of all there is no! connection block only two plug connectors.
One two pin plug:- with black leads.
A three pin plug with:- Red,Yellow & Green leads (motor winding's) resistances of which are:-
R-Y 43.7 OHMS R-G 14.9 OHMS G-Y 29.4 OHMS
Black-BL .5 OHMS (separate winding)
These in turn connect to a six pin on/off switch and a relay.
Together with the above is a 5mfr capacitor (non! electrolytic)
| 11 years ago. Rating: 0 | |
