3 Answers
You can dry wet ignition wires with WD-40 spray. You may have to take them off each plug, and dry each, if excessively wet. Remember, only one off at the time, or your problems become much worse, you need to keep each wire in its proper location, or you will effect the timing of the engine! Next time, get a can of spray engine cleaner, and follow directions. I do it once per year, never had a problem, you only need a quick spray to rinse the cleaner. And do this on a warm engine, not too hot, it does help the water dry off.
11 years ago. Rating: 4 | |
Top contributors in Automobile category
Unanswered Questions
nhacaic54gg
Answers: 0
Views: 6
Rating: 0
Bolagila menyediakan link daftar provider judi bola parlay KUBET official partner EURO 2024.
Answers: 0
Views: 7
Rating: 0
mzregisters
Answers: 0
Views: 7
Rating: 0
nohu90kim
Answers: 0
Views: 9
Rating: 0
hello88gamesshow
Answers: 0
Views: 11
Rating: 0
hello88gamesshow
Answers: 0
Views: 7
Rating: 0
VANDO88
Answers: 0
Views: 11
Rating: 0
V9BET: Điểm đến lý tưởng cho những người yêu thể thao và game casino
> More questions...
Answers: 0
Views: 7
Rating: 0
All you can do now is let it dry out and hope it will run before all the working parts get rusty.Good Luck