metallica
how to cure no injector pulse on a 1996 Holden VS Commodore V6 Ecotec motor
Cahanged engines. swapped VS V6 with a VS V6, Put original engine wiring loom on replacement engine, Since then, have changed CAS, Cam hall effect sensor, chipset in pcm, key remote head, tried to follow thick orange wire from power side of EFI f/ pump relay. Followed it to the 6 pin connector on the end of the engine loom. wire then swaps to a thinner purple wire which follows along the R/H injector bank and goes under the alternator, eventually running down behind the power steering pulley ending up as the power wire for the oil pressure switch.Can't work out how this could haqppen when we were replacing one motor for the same model and type of engine....
1 Answer
Dardaigh
Top contributors in Automobile category
Unanswered Questions
Bí Quyết Chơi Lô Đề Online Hiệu Quả Tại 789CLUB
Answers: 0
Views: 3
Rating: 0
Bầu Cua 789CLUB – Trải Nghiệm Giải Trí Hiện Đại, Tối Ưu Cơ Hội Chiến Thắng
Answers: 0
Views: 3
Rating: 0
K99okcom
Answers: 0
Views: 8
Rating: 0
Jakir
Answers: 0
Views: 13
Rating: 0
Jakir
Answers: 0
Views: 8
Rating: 0
Topbet - Trang Chủ Topbet Link Truy Cập Chính Thức 2026
Answers: 0
Views: 13
Rating: 0
Mmooworks
Answers: 0
Views: 13
Rating: 0
58win68london
> More questions...
Answers: 0
Views: 9
Rating: 0