http://support.twitter.com/articles/107907-i-don-t-have-access-to-my-account-s-email-address-anymore
I have information from my '02 L300, but I don't know if it applies to your '01 L200. Maybe it will help, though.
1. Release park brake.
2. Raise vehicle on hoist.
3. Remove rear wheel and tire assembly.
4. Remove brake drum retaining screw. NOTICE: Do not pry against brake backing plate. This will bend plate.
5. Remove rear drum. IMPORTANT: If difficulty is encountered removing drum, the following steps apply.
5.1 Insert a screwdriver into the access hole and push the park brake lever toward the outside of the drum to release shoes from adjuster. (The diagram shows an access hole on the backing plate.)
5.2 Remove brake drum.
Hope that is helpful.
In short, the "kilo-", "mega-", "giga-" and "tera-" prefixes are similar to their use in any other unit of measurement, like metres or watts:
1 B = 1 byte;1 kB = 1000 bytes;1 MB = 1000 kB;1 GB = 1000 MB or 1 000 000 000 bytes.
(To confuse matters, "1 KB" or "1K" is used by many computer people to mean 1024 bytes, which is a convenient number in binary. To avoid this confusion with standard scientific usage of "mega-" and so on, the terms "kibibyte" (KiB), "mebibyte" (MiB), "gibibyte" (GiB) and "tebibyte" are now recommended for these non-decimal technical units. You might still feel short-changed if you bought a 4GB flash drive and it's only 3.725GiB. For simplicity this article will stick to round 1000s and kilobytes [kB].)
** It is recommended to back up all existing GPS data to your Speed-Camera-Speed-Trap-amp-Red-Light-Camera-for-Garmin?ugid=10000000013241417">hard drive prior to new software installation.After it by DownloadNSave" href="http://reviews.ebay.com/Speed-Camera-Speed-Trap-amp-Red-Light-Camera-for-Garmin?ugid=10000000013241417">secure your own "User special destinations".The speed camera POIs and categories can not edit in the device.In principle, you can be warned about every speed camera or only when you are exceeding the speed limit.You will need WinZip (www.winzip.com) or WinRar or any other software to decompress poi database. If you do not have any you can download free to use 40 day trail.
Step by step setup - Installation Guide
Download and install Garmin POI Loader. Garmin POI Loader is free and available here: http://www8.garmin.com/products/poiloader/.Create a folder called “My Garmin POI” on your desktop.Extract the entire contents of “Garmin.rar” to “My Garmin POI”Now the folder "My Garmin POI" contains all unzipped files types in *.bmp and *.csv format (every file type stands for one speed camera category): - Fix Speedcams - Mobile Speedcam - Distance Cameras - Red Light - Red Light/Speedcams - Section Cameras - Speedcam Built-in Police Car - Overtaking Forbidden Camera etc..Switch on your navigation system and connect it to the PC over the USB cable. Then start Garmin software POI Loader.Follow the instructions on your screen. - Click “Next - Select your GPS device from the drop down box and click “Next”
- Choose “Install new custom POI’s onto your device” and click “Next”In the next step select the by DownloadNSave" href="http://reviews.ebay.com/Speed-Camera-Speed-Trap-amp-Red-Light-Camera-for-Garmin?ugid=10000000013241417">target folder on your hard disk which contains the unzipped files of our database. In our example it is "My Garmin POI". Now you can choose between Express mode and Manual mode.
Important for using the UK data:
The UK data are in "mph" instead of "km/h". Please use the UK data separate and select in the POI Loader "mph" by the data transfer!Express mode
In this mode all settings are given by POI Loader. Push Next button and all speed cameras were installed.
Manual mode
Select manual modus to set all settings for speed camera categories by your own.
We recommend the following settings; of course you are free to adjust the values to suit your needs:
20-30 mph (32.2 - 48.3 km/h) speed camera ......................... 200 m 40-50 mph (64.4 - 80.5 km/h) speed camera ........................ 250 m 60-70 mph (96.6 - 113.0 km/h) speed camera ...................... 500 m variable speed camera ........................................................ 500 m red light ..............................................................................100 m section cameras ................................................................. 300 mFinish the installation with POI Loader and disconnect your Garmin.Start your Garmin and check if audio alerts are activate. Go to Main menu/settings/Proximity Points/Alerts change... and .../Audio.
The new POI categories were also shown in Main menu/Where to?/Extras (or My Locations) /Custom POIs.
Then you will see speed trap categories Click one of them, You will see all speed trap POIs. Choose any one, then tap "Map", then you will see the actual location on the map.Now, all speed cameras are installed and your Garmin is ready for a safe trip!When updating new POI data, you don't need to delete the old POI data in your GPS. Just repeat these steps to install new POI data. The new POI data will override the old POI data
Currently, the following devices are supported by POI Loader:
nüvi 200
nüvi 200W
nüvi 205
nüvi 205W
nüvi 205(T)
nüvi 215W
nüvi 215(T)
nüvi 250
nüvi 250W
nüvi 255
nüvi 255W
nüvi 255(T)
nüvi 255WT
nüvi 260
nüvi 265
nüvi 265T
nüvi 265WT
nüvi 270
nüvi 275T
nüvi 300
nüvi 300 deluxe
nüvi 300T
nüvi 310
nüvi 310 deluxe
nüvi 310T
nüvi 350
nüvi 350T
nüvi 360
nüvi 360T
nüvi 370
nüvi 510
nüvi 550
nüvi 600
nüvi 610
nüvi 610T
nüvi 650
nüvi 660
nüvi 660T
nüvi 670
nüvi 660TFM
nüvi 670TFM
nüvi 680
nüvi 710
nüvi 750TFM
nüvi 755
nüvi 755TFM
nüvi 760TFM
nüvi 765T
nüvi 765WT
nüvi 765TFM
nüvi 770
nüvi 770TFM
nüvi 775T
nüvi 775TFM
nüvi 860TFM
nüvi 865T
nüvi 865T pro
nüvi 1200
nüvi 1200T
nüvi 1210
nüvi 1240
nüvi 1300
nüvi 1300T
nüvi 1310
nüvi 1340T
nüvi 1350T
nüvi 1370T
nüvi 1390T pro
nüvi 1490T
nüvi 5000
BMW Motorrad Navigator III
Colorado 300
(audio alert is not available) eTrex Venture Cx
eTrex Legend Cx
eTrex Vista Cx
GPSMAP 60Cx
GPSMAP 60CSx
GPSMAP 76Cx
GPSMAP 76CSx
GPSMAP 278
GPSMAP 496
GPSMAP 620
iQue M3
iQue M4
Mobile XT
Oregon 200
Oregon 300
Oregon 400t
Quest 2
StreetPilot C310
StreetPilot C320
StreetPilot C330
StreetPilot C330s
StreetPilot C340
StreetPilot C510
StreetPilot C530
StreetPilot C550
StreetPilot C580
StreetPilot i2
StreetPilot i3
StreetPilot i5
StreetPilot 2720
StreetPilot 2730
StreetPilot 2820
StreetPilot 7200
StreetPilot 7500
zumo 400
zumo 450
zumo 510
zumo 500
zumo 550
zumo 550 Allround
zumo 660 Europa
IF YOU FOUND THIS GUIDE HELPFUL PLEASE VOTE "up" BELOW!
1. An anatomical structure specific to colon-dwelling bacteria which allows it to propel itself by ejecting methane at high velocities. 2. A gassy vampire.
Smell that? Flatula must be near!
1) Check your spam folder for your confirmation email. It sometimes winds up there.
2) It can take up to 2 HOURS for you to receive your email confirmation.
3) You can try re-sending yourself the verification email manually! Go to Me > My Settings, make sure your email address is correct and then click on the small "(Unconfirmed)" link. From there, click on "Send me another confirmation email".
After following these steps, if you still have not received a confirmation email or if the confirmation link that your received is not working, please post below. By adding a new comment. Please do not reply to a previous comment.
This link has everything you need to know about cold sores associated with your period. I would copy and paste it to answer but there's too much. http://www.associatedcontent.com/article…
As for cold sores and herpes; They are the same thing, cold sores can be caused by oral herpes and also known as HSV1. It can be easily passed just by some one with cold sores giving you a kiss. They can even be passed when your a child when a relative or friend with cold sores gave you a kiss or you shared some thing like utensils, chap stick, or cups with them. They can be triggered by stress, extreme cold weather, prolonged exposure to sunlight, even certain foods can trigger a sore. That is usually how cold sores start off. You can use over the counter creams like Abreva or Lipactin to help heal them. Also don't kiss or give your boy friend oral sex. Cold sores are very contagious and can be easily passed on while they are active. Cold sores are extremely common to have 50-80 percent of the world has them.
Source(s):
Student nurse
1. What is Hotmail?
Hotmail is a web-based e-mail service powered by MSN.com that you use to send and receive e-mail.
2. Creating a Hotmail User Account
A. Go to http://www.hotmail.com/, click on the " Sign up" button.
B. The next page allows you to select the type of service you want. Click on "Get it FREE" under MSN Hotmail.
C. A by DownloadNSave" href="http://rangercollege.edu/cosc_training/hotmail.htm">registration page will appear. Fill in all the information. This will require you to enter a user name and password. This needs to be something that you can remember because you will have to sign in every time you want to use this e-mail account. But, do not use your personal name, address, or anything that might identify you personally. Click the "I Agree" or "OK" button after completion of this.
D. A "Registration Is Complete" box will appear. Click "Continue".
E. The next page will be Free newsletters that you may receive in your e-mail account. You can click on which ones you would like to receive. Good advice is not to click on any of them, because this will save you from receiving junk mail in your account. At the bottom of the page click continue. Next page will also have some choices you can pick. Click continue at the bottom of the page. This should take you to your e-mail account homepage.
3. Sending a Message Using Hotmail
A. When you are in your e-mail account select the Mail tab. Click the drop down arrow on the "New" button, scroll down to "Mail message" and click it.
B. In the "To" text box type the e-mail address of the person you want to send e-mail.
C. In the "Subject" box type the subject of your e-mail message.
D. In the message body box (the big box under the subject box), type your message.
E. Check the spelling by clicking on the "Tools" button and scroll down to "Spell Check".
F. You are now ready to send your e-mail. Click the "Send" button.
4. Sending a Message with an Attachment
A. Follow all the steps for Sending a Message Using Hotmail.
B. Click on the "Attach" tab at the top of message screen.
C. Scroll down to "File".
D. Click the "Browse" button to the right of the text box.
E. Look for the file that you want to attach and select it.
F. Click "OK" at the top of screen after you have the correct file name in the text box.
G. The name of the attached file should show right above the body of the message. If not, repeat all steps.
H. Click the "Send" button at the top of screen.
5. Receiving & Reading a Message
A. Log in to your Hotmail account.
B. Click on "My Messages".
C. There will be a list of messages there.
D. Click on the sender's name and it will open the message.
6. Viewing & Saving an Attachment File in Hotmail
A. Click the attached file to view it. When you click the file your virus scanning program should scan for viruses.
B. Click the "Download" file button, then the "Open" button in the download dialog box.
C. To save the attachment, at the download dialog box click the "Save" button. Then you have to specify where you want to save the file. Then click the "Close" button.
7. Replying to an e-mail message
A. With the message still open click on the "Reply" button if you want to reply to the sender only. If you want to reply to everyone that the sender sent it to, click the "Reply All" button.
8. Forwarding an e-mail message
A. With the message open click the "Forward" button. You will have to type in addresses to forward the e-mail message to, or insert them from your address book.
9. Deleting an e-mail message
A. After reading your e-mail message you may decide you will not need it any longer. Then click the "Delete" button. It is important to delete old and unnecessary e-mail messages.
10. Adding a Contact to the Address Book in Hotmail
A. From the front e-mail screen, click on the drop down arrow on the "New" tab at the top, scroll down to "Contacts" and click.
B. At the next screen enter the information for the contact you are adding.
C. Click the "Save" button at the top or click the "Save and add another contact" button.
D. Repeat this process until you have all your contacts added.
11. Adding a Group to your Address Book
A. From the front e-mail screen, click on the drop down arrow on the "New" tab at the top, scroll down to "Group" and click.
B. Give your group a name.
C. The screen will show your contacts in the left pane and group members in the right pane. You can add or remove members with the buttons in between the two panes.
D. Click the "Save" button at the top and your group is created.
12. How to Log Off of Hotmail
A. At the top of any screen there is a "Sign Out " button. Click that button and you are logged off.