Wait until the second hand touches the 12 to begin setting the time. That way you can start it at the beginning of a minute instead of in the middle. Find the crown on the right side of your watch's face. It is a round metal knob with ridges on the side. It should be directly in the center.
Pull the crown out to the right as far as you can. On some watches you will need to twist it clockwise first to make it pop out. If it won't pull out with a light tug, this is probably the case with yours. When you have it out correctly, all three hands will stop moving.
Turn the crown clockwise until your watch shows the correct time. If you skip ahead too far, just turn it counterclockwise to go back. Turning slowly is best, as it will keep your watch in good shape for longer. When you're done, push the crown back in all the way. Try to do so just when the minute changes on the clock you are using for reference, so your watch stays accurate.
Look at your watch to ensure the hands are moving. If not, push the crown in further. You should feel a small click when it is back in place.
Read more: How to Set a Vivani Accutime Watch | eHow.com http://www.ehow.com/how_5219025_set-vivani-accutime-watch.html#ixzz2F0wiU21V
|4 years ago. Rating: 1|
I got the answer!!!! The set pin is a "screw-down". You have to unscrew it ( you may need some needle-nosed pliers). Once it's unscrewed, THEN it will click out a little further and you can set it. Pay attention when you click it back in and tighten it.... it may move the hands a bit. WOOHOO!!!
|3 years ago. Rating: 0|