4 Answers

Your jets are clogged, you have to take apart the carburetor and clean them....

If you loosen the clamp that clamps the carburetor to the head you should be able to turn the carb to one side or the other. When you do this you will see the bottom of the carb or the bowl. Take the bowl off (usually 4 screws) and you will see a little hollow pipe looking thing in there. That is the jet, it threaded in to the body of the carb. Unscrew the jet and spray it with carb and choke cleaner, find a paper clip or something of the sort that you can run through the jet to get any debris out of it. Reassemble and you should be good to go.

http://answers.yahoo.com/question/index?qid=20071002142116AAakhdg

12 years ago. Rating: 3
Comment this answer Add new comment

Try not to re-ask the sane question. If you don't get an answer quickly, ask it in the answer area and see what happens you can do this over and over and maybe ask it a little different each time.

12 years ago. Rating: 3
Comment this answer Add new comment

Your pulling air from somewhere. Check all lines and the carb bolts as well.

12 years ago. Rating: 1
Comment this answer Add new comment

THANKS I DID THAT BUT I STILL HAVE TO HAVE CHOKE ON

12 years ago. Rating: 1
Comment this answer Add new comment