Squeeze behind them when the plane crashes.
It's for you to follow others questions. I'll mark this one on mine...lol
Sounds like he'll get what he's comfortable with. Tell him you want a pink lady, that'll stop the bear.
bummer
866-562-7219 How to reach a live person: Press 2 when recording asks for your selection Hours of Operation: Mon-Fri: 6am - 6pm PT
I dont have a Canon printer but if I did have a particular model I'd pull on some plastic until I found it.
Only a million but if I turn 999,999 and 360 days I might feel differently.
I Saved By buying Zero but it was worthless so I paid zero zero and saved zero but the song was worth more to the record company and they're still making zeros. If Zero saves then he better save himself.....Aquazerolung,.....Zeromotive Breath ......Thick as a Zero...... Jethro Tullzero
jack up vehicle and put a jack stand under it (dont trust the jack to hold it up, get something solid under it at the frame) lug wrench to remove tire (lossen nuts before you jack it up all the way off the gound or someone will have to push on the brakes) , probable large 3/8 allen head (two bolts that hold the caliper to the vehicle with heads on the backside of the caliper) (you see the bolts, feel the backside of them and you'll feel the allen head hole) to loosen calipers(calipers are the big heavy steel things that hold the pads) (rotors are the big round steel shiny things the pads grab, the disc) (may need to tap the wrench with a hammer), wrench for bleeder valve prob. 1/4 or 5/16, a clamp to squeeze calipers open when you open the bleeder valve (after you tap the caliper off you need to squeeze the piston either by hand or with a hand pump type of clamp so you can get the new pads to clear the rotor sides by losening the bleeder valve thus releaving the pressure on them), new pads, put new pads in place and put back on rotor, tighten allen bolts (tight, may need hammer to tap it good and tight), fill brake fluid reservoir, someone pump up brakes while someone bleeds out air from the bleeder valve furthest from the res. (put a tube on the bleeder valve and run in to a container to catch fluid, or something under it to keep it from making a mess, like rags) (hold pedel down until valve is shut, then pump up again and hold down pedel and lossen valve, repeat until no air left in line) then the other side, when you have brakes that dont feel spongy put the tires back on. You may have to bleed the brakes from the right rear, leaf rear, right front, left front but with newer vehicle they should be split for front and rear because the front does more work, check at the reservoir, the master cylinder the below the res. to see if lines for frt and rear run out of two different places. Wear old clothes because it's not clean work. try not to breath any brake dust. Dont touch the rotors any more than necesary, rotors dont like oil/grease. dont gouge the new pads getting them back in place. Calipers are heavy, dont let the weigh hang on the brake line/hose and dont get a twist in it when you put in on. Now go some fun :)