it's a virtual network so it's located all over the world on servers and computers
1. Power on (NO Disc.)
2. Press Pause
3. Enter 314159(with remote)
Display will show "FF"
4. Quickly press "0" (for all region)
5. Press pause
6. Power off and powere on after 20 secs
You can also try this:
Goto 'Setup'
Scroll to 'Lock' (don't scroll sideways from here)
press '0' seven times
press 'Enter'
Pretty simple actually -
Please follow these steps:
Menu (center button c/b ) > right > down > down > select (c/b) > up (that should get you to master reset) > select (c/b) > down (that should be reset all) > select ( c/b ) > (warning appears) select ( c/b ) > (another warning) select ( c/b ) > and the phone will be reset and re-started, may take a few minutes though
Click on this link
If you click on 'Try the phone' it will open a new window that allows you to use all the features in demo format.
On the demo click - Menu > Right > Down > Down > Select (c/b) > Up > Select > Down > Select > follow from there
Hopefully all this is clear enough and doesn't confuse things for you
Usually it will show up in your "Download" folder
You can probably get one on ebay for $40-$90 depending on condition
Here you go: Click here
Probably US bonds.
Remove the Old Battery
When removing a battery always remove the negative cable first followed by the postive. If you touch a wrench to the frame while removing the positive cable with the negative attached you can cause an explosion or fire resulting in serious acid or fire burns. Loosen the clamp that holds the battery in place and carefully lift the battery out. Since batteries contain corrosive materials, it's a good idea to wear rubber gloves and safety glasses when handling them.
Install a New Battery
Inspect the tray that holds the battery and clean any corrosion from it. Then inspect the cables and terminal ends and replace as necessary. Apply a coat of terminal protection spray to the new battery and secure it in the tray. Fit battery washers over the terminals, re-attach the battery cables and tighten the terminal clamps securely with the socket wrench.
AEFE TV channel
http://www.aefe.fr/